McDATA 316095-B21 - StorageWorks Edge Switch 2/24, Manual

Page: 205 / 684

A
FA MIB
A-35
Fibre Alliance MIB
Status
current
Description
The table of connectivity unit events. Errors, warnings, and
information should be reported in this table.
Sequence
::= { fcMgmtConfig 7 }
fcConnUnitEventEntry
Syntax
FcConnUnitEventEntry
Max-Access
not-accessible
Status
current
Description
Each entry contains information on a specific event for the given
connectivity unit.
INDEX { fcConnUnitId, fcConnUnitEventIndex }
Sequence
::= { fcConnUnitEventTable 1 }
FcConnUnitEventEntry ::=
SEQUENCE {
fcConnUnitEventIndex
Syntax
Unsigned32
Max-Access
read-only
Status
current
Description
Each connectivity unit has its own event buffer. As it wraps, it may
write over previous events. This object is an index into the buffer. It is
recommended that this table be read using 'getNext's to retrieve the
initial table. The management application should read the event table
at periodic intervals and then determine if any new entries were
fcConnUnitEventIndex Unsigned32,
fcConnUnitREventTime DisplayString,
fcConnUnitSEventTime TimeTicks,
fcConnUnitEventSeverity FcEventSeverity,
fcConnUnitEventType INTEGER,
fcConnUnitEventObject OBJECT IDENTIFIER,
fcConnUnitEventDescr SnmpAdminString}