D
FCFE.MIB
D-23
Fabric Element Management MIB
Status
mandatory
Description
This object identifies the FxPort within the module. This number
ranges from 1 to the value of fcFeModulePortCapacity for the
associated module. The value remains constant for the identified
FxPort until the module is re-initialized.
Sequence
::= { fcFxPortPhysEntry 2 }
fcFxPortPhysAdminStatus
Syntax
INTEGER {
online (1), -- place port online
offline (2), -- take port offline
testing (3) -- initiate test procedures }
Access
read-write
Status
mandatory
Description
The desired state of the FxPort. A management station may place the
FxPort in a desired state by setting this object accordingly. The
testing(3) state indicates that no operational frames can be passed.
When a Fabric Element initializes, all FxPorts start with
fcFxPortPhysAdminStatus in the offline(2) state.
As the result of either explicit management action or per
configuration information accessible by the Fabric Element,
fcFxPortPhysAdminStatus is then changed to either the online(1) or
testing(3) states, or remains in the offline state.
Sequence
::= { fcFxPortPhysEntry 3 }
fcFxPortPhysOperStatus
Syntax
INTEGER {
online (1), -- Login may proceed
offline (2), -- Login cannot proceed
testing (3), -- port is under test
link-failure (4) -- failure after online/testing
Other values may be used to indicate diagnostic for failed test. }
Access
read-only
Summary of Contents for 316095-B21 - StorageWorks Edge Switch 2/24
