McDATA 316095-B21 - StorageWorks Edge Switch 2/24, Manual

Page: 280 / 684

B
B-32
E/OS SNMP Support Manual
FC Management MIB
NOTE:
Each implementation may chose not to allow any or all of these
values on a SET. On a read, if you do not support write, then return invalid.
Otherwise return the last control operation attempted.
Sequence
::= { connUnitPortEntry 16 }
connUnitPortName
Syntax
DisplayString
Access
read-write
Status
mandatory
Description
A user-defined name for this port. This means that up to
DisplayString characters may be supported. If less than, then the
name will be truncated in the connunit.
offlineConnUnitPort: If the addressed connUnit allows this
operation to be performed to this port,
the addressed port performs a
vendor-specific 'offline' operation.
Examples of these operations are
disabling a port's transceiver, the Link
Failure protocol, request
(NON-PARTICIPATING) command to
the Loop Port state machine, or removal
of the port from an arbitrated loop by a
hub.
onlineConnUnitPort: If the addressed connUnit allows this
operation to be performed to this port,
the addressed port performs a
vendor-specific 'online' operation.
Examples of these operations are
enabling a port's transceiver, the Link
Failure protocol, request
(PARTICIPATING) command to the
Loop Port state machine, or addition of
the port from an arbitrated loop by a
hub.
resetConnUnitPortCounters: If the addressed connUnit allows this
operation to be performed to this port,
the addressed port statistics table
counters will be set to zero.