MBRAUN MB 120B-G, Operating Instructions Manual

Page: 65 / 105

Status indicator of the “Refill Antech.“ Hardkey not illuminated.
Refilling completed
Caution!
For obtaining a high degree of purity, the antechamber should undergo repeated evacuation and
refilling procedures.
Removal of material
Open antechamber door located inside the box.
If a sliding tray is available: Pull out sliding tray;
lay
material
on
tray; then slide the tray
together with the material into antechamber.
If no sliding tray is available: Transfer the material directly into antechamber.
Then close antechamber door located inside the box.
Note!
Applies only to systems equipped with an optional automatic antechamber control.
Preparation
Observe Item “Important Notes“ in this chapter.
The antechamber door located inside the box is closed.
The outer antechamber door is open.
If a sliding tray is available: Pull out sliding tray; lay material on tray; then slide the tray
together with the material into antechamber.
If no sliding tray is available: Transfer the material directly into antechamber.
Then close outer antechamber door.
!
Chapter 12
Antechamber Operation
66
Refill
Antech.
Transferring material into the box (automatic antechamber control)
!