MBRAUN MB 120B-G, Operating Instructions Manual

Page: 19 / 105

Connecting equipment for vacuum pumps
Exhaust
piping for vacuum pump waste gas
Connecting equipment for the water cooling
Cooling water
Supply pipings for water cooling (supply and drain piping)
Power connection
Depending on the system, refer to type plate.
Optional (length as required):
either:
9 mm dia. reinforced hose, 3 mm wall thickness and adapter, 9 mm dia. hose
nozzle with 10 mm dia. Swagelok
©
screwed fitting
or:
10 mm dia. copper pipe and 10 mm dia. Swagelok
©
screwed fitting
or:
10 mm dia. stainless steel pipe and 10 mm dia. Swagelok
©
screwed fitting
Material:
Optional (length as required):
either:
16 mm dia. reinforced hose and 16 mm hose nozzle
or:
16 mm dia. copper pipe, as well as flange and clamp
or:
16 mm dia. stainless steel pipe as well as flange and clamp
Cooling the system
Tap water
water temperature: 10°C to 15°C
flow rate: 2 l/min at 10°C, 5 l/min at 15°C
water disposal: depressurized
Use:
Material:
Material:
Connecting the vacuum pump exhaust (oil mist and waste gas) with the factory’s
waste gas disposal facility (depressurized exhaust outlet)
Use:
Chapter 3
Preparing the Connections
20