MBRAUN MB 120B-G, Operating Instructions Manual

Page: 57 / 105

!
The operation mode to be changed can be selected by press-
ing the arrow keys.
The operational mode can be changed by pressing the
“SHIFT” key and
the
subsequent arrow keys.
The input data is acknowledged by pressing the “ENTER” key.
Note!
For getting access to the “ Parameter set ” display area
,
press
the
F7 softkey in selection level 1 .
In this area the current box parameters can be changed, e.g. setpoints.
The parameter to be changed can be selected by press-
ing the arrow keys.
The desired value can be entered via the number block.
Note!
Remember to enter reasonable parameters
only, otherwise the values will not be
accepted.
The input data is acknowledged by pressing the
“ENTER” key.
!
Chapter 11
Settings and Display Patterns
ENTER
Parameter set
ENTER
SHIFT
7 8 9 0
4
D
5
E
6
F
.
1
A
2
B
3
C
+/-