Mazda 6 2011 Manual Download Page 385 | Manualshive

Page: 385 / 522

background image

q

Spare Tire

Your Mazda has a temporary spare tire.
The temporary spare tire is lighter and
smaller than a conventional tire, and is
designed only for emergency use and
should be used only for VERY short
periods. Temporary spare tires should
NEVER be used for long drives or
extended periods.

WARNING

Do not install the temporary spare tire
on the front wheels (driving wheels):

Driving with the temporary spare tire
on one of the front driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound
roads, and have an accident. Move a
regular tire to the front wheel and
install the temporary spare tire to the
rear.

CAUTION

Ø

When using the temporary spare
tire, driving stability may decrease
compared to when using only the
conventional tire. Drive carefully.

Ø

To avoid damage to the temporary
spare tire or to the vehicle, observe
the following precautions:

Ø

Do not exceed 80 km/h (50
mph).

Ø

Avoid driving over obstacles.
Also, do not drive through an
automatic car wash. This tire's
diameter is smaller than a
conventional tire, so the ground
clearance is reduced about
7 mm (0.3 in).

Ø

Do not use tire chains on any
type of tire, including the spare
tire.

Ø

Do not use your temporary
spare tire on any other vehicle,
it has been designed only for
your Mazda.

Ø

Use only one temporary spare
tire on your vehicle at the same
time.

NOTE

(With Tire Pressure Monitoring System)

A tire pressure sensor is not installed to the
temporary spare tire. The warning light will
flash continuously while the temporary spare
tire is being used (page 5-29).

In Case of an Emergency

Flat Tire

7-5

Mazda6_8BG7-EC-10H_Edition1 Page385
Monday, August 2 2010 1:28 PM

Form No.8BG7-EC-10H

«
...
383
384
385
386
387
...
»

Summary of Contents for 6 2011











































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6 2011

Brand: Calira Pages: 14

Brand: Ecco Pages: 9

Brand: Ecco Pages: 9

Brand: TATA Motors Pages: 164

WrapAround Windjammer

Brand: Bestop Pages: 7

Brand: muth Pages: 10

Brand: iArmor Pages: 4

Brand: Xhorse Pages: 48

Brand: Meta System Pages: 22

Brand: UAZ Pages: 112

Brand: Honda Pages: 124

Brand: iDataLink Pages: 6

Brand: Gentex Pages: 2

Brand: Edelbrock Pages: 2

Brand: Hudson Pages: 77

Brand: Easee Pages: 21

Brand: Honda Pages: 279

Brand: Kargo Master Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands