Mazda 6 2011 Manual Download Page 394

Page: 394 / 522

Starting a Flooded Engine

Except 3.7-liter engine

If the engine fails to start, it may be
flooded (excessive fuel in the engine).

Follow this procedure:

(Without Advanced Keyless Entry &
Push Button Start System)

1. If the engine does not start within five

seconds on the first try, switch the
ignition off, wait ten seconds and try
again.

2. Depress the accelerator all the way and

hold it there.

3. Switch the ignition to START and hold

it there

―

for up to ten seconds. If the

engine starts, release the key and
accelerator immediately because the
engine will suddenly rev up.

4. If the engine fails to start, crank it

without depressing the accelerator

―

for

up to ten seconds.

(With Advanced Keyless Entry & Push
Button Start System)

1. If the engine does not start within five

seconds on the first try, wait ten
seconds and try again.

2. Depress the accelerator all the way and

hold it there.

3. Depress the clutch pedal then press the

push button start. If the engine starts,
release the key and accelerator
immediately because the engine will
suddenly rev up.

4. If the engine fails to start, crank it

without depressing the accelerator.

If the engine still does not start using the
above procedure, have your vehicle
inspected by an Authorized Mazda
Dealer.

7-14

In Case of an Emergency

Emergency Starting

Mazda6_8BG7-EC-10H_Edition1 Page394
Monday, August 2 2010 1:28 PM

Form No.8BG7-EC-10H

Summary of Contents for 6 2011











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands

Mazda 6 2011, Manual

Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands