Mazda 6 2011 Manual Download Page 150

Page: 150 / 522

Ignition Switch

With advanced key

Refer to

“

Starting the engine (page 3-10)

”

for information on how to use the ignition
switch.

Ignition Switch Positions (without
Advanced Key)

With LOCK
position

With OFF
position

The engraved mark (LOCK) indicated in
the illustration may differ from that
indicated on the actual vehicle (it may
read OFF).

OFF/LOCK

The power supply to electrical devices is
turned off. Only in this position can the
key be removed.

Manual transaxle

To switch the ignition from ACC to OFF/
LOCK, push the key in at the ACC
position, then turn it to the OFF/LOCK
position.

Push the key

Automatic transaxle

To switch the ignition from ACC to OFF/
LOCK, the shift lever must be in the P
position.

Shift lever
engaged in P
(park)

5-2

Driving Your Mazda

Starting and Driving

Mazda6_8BG7-EC-10H_Edition1 Page150
Monday, August 2 2010 1:26 PM

Form No.8BG7-EC-10H

Summary of Contents for 6 2011











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands

Mazda 6 2011, Manual

Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands