Mazda 6 2011 Manual Download Page 444

Page: 444 / 522

6. Install the new bulb in the reverse order

of removal.

Side turn signal lights

, High-mount

brake light, Ground illumination
lights

Due to the complexity and difficulty of
the procedure, the bulbs must be replaced
by an Authorized Mazda Dealer.

Brake lights/Taillights (Rear side
marker lights)

LED type

Due to the complexity and difficulty of
the procedure, the LED bulbs must be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible because
it is built into the unit. Replace the unit.

Bulb type

1. Pull the center section of the plastic

retainer and remove the retainers and
partially open the trunk side trim.

Removal

Installation

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an Authorized
Mazda Dealer.

Rear turn signal lights

1. Pull the center section of the plastic

retainer and remove the retainers and
partially open the trunk side trim.

Removal

Installation

2. Turn the socket and bulb assembly

counterclockwise and remove it.

8-44

Maintenance and Care

Some models.

Owner Maintenance

Mazda6_8BG7-EC-10H_Edition1 Page444
Monday, August 2 2010 1:29 PM

Form No.8BG7-EC-10H

Summary of Contents for 6 2011











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands

Mazda 6 2011, Manual

Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands