Mazda 6 2011 Manual Download Page 370

Page: 370 / 522

Clock

NOTE

When the trip computer is being displayed,
press the CLOCK button to change the display
to the time.

When the ignition is switched to ACC or
ON, the time is displayed.

Without navigation system

Time setting

1. Switch the ignition to ACC or ON.

2. Adjust the time using the time setting

buttons ( ,

The hours advance while the time
setting button ( ) is pressed.
The minutes advance while the time
setting button (

) is pressed.

Time resetting (Without trip computer
type only)

1. Switch the ignition to ACC or ON.

2. Press and hold the :00 button for 1.5

seconds or more. The displayed time
flashes.

3. When the button is released, the time

will be reset as follows:

(Example)
12:01

―

12:29

→

12:00

12:30

―

12:59

→

1:00

NOTE

When the button is released, the seconds will
start at

“

”

With navigation system

Refer to the separate manual

“

NAVIGATION SYSTEM

”

NOTE

Minutes and seconds are adjusted by the GPS,
however, it is necessary to adjust hours under
the following conditions:

Driving across different time zones

Daylight saving time start and end

Climate Control Display (Fully
Automatic Type)

The climate control system status is
displayed. To operate the climate control
system, refer to

“

Climate Control System

”

(page 6-2).

Audio Display

The audio system status is displayed. To
operate the audio system, refer to

“

Audio System

”

(page 6-16).

Trip Computer

The trip computer can display the
following:

The current fuel economy.

The average fuel economy.

The approximate distance you can
travel on the available fuel.

The average vehicle speed.

Switch the ignition ON.
Press the INFO switch to change the
display mode.

6-146

Interior Comfort

Some models.

Interior Equipment

Mazda6_8BG7-EC-10H_Edition1 Page370
Monday, August 2 2010 1:28 PM

Form No.8BG7-EC-10H

Summary of Contents for 6 2011











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands

Mazda 6 2011, Manual

Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands