Mazda 6 2011 Manual Download Page 113 | Manualshive

Page: 113 / 522

background image

q

Operating the Driver's Side
Power Window

Manual opening/closing

To open the window to the desired
position, lightly hold down the switch.
To close the window to the desired
position, lightly pull up the switch.

Open

Close

Driver's
window

Auto-opening/closing

To fully open the window automatically,
press the switch completely down, then
release. The window will fully open
automatically.
To fully close the window automatically,
pull the switch completely up, then
release. The window will fully close
automatically.

To stop the window partway, pull or press
the switch in the opposite direction and
then release it.

NOTE

If the battery was disconnected during vehicle
maintenance, or for other reasons such as a
switch continues to be operated after the
window is fully open/close, the window will not
fully open and close automatically. Carry out
the following procedure to resume operation:

1. Switch the ignition ON.

2. Press the switch and fully open the window.

3. Pull up the switch to fully close the window

and continue holding the switch for about 2
seconds after the window fully closes.

Jam-safe window

If a person's hands, head or an object
blocks the window during the auto-
closing operation, the window will stop
and open halfway.

WARNING

Make sure nothing blocks the window
just before it reaches the fully closed
position or while holding up the power
window switch:

Blocking the power window just
before it reaches the fully closed
position or while holding up the
power window switch is dangerous.
In this case, the jam-safe function
cannot prevent the window from
closing all the way. If fingers are
caught, serious injuries could occur.

NOTE

Depending on driving conditions, a closing
power window could stop and start opening
when the window feels a shock that is similar
to something blocking it.
In the event the jam-safe function activates and
the power window cannot be closed
automatically, pull and hold the switch and the
window will close.

Knowing Your Mazda

Doors and Locks

3-41

Mazda6_8BG7-EC-10H_Edition1 Page113
Monday, August 2 2010 1:26 PM

Form No.8BG7-EC-10H

«
...
111
112
113
114
115
...
»

Summary of Contents for 6 2011











































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6 2011

Brand: Warrior Winches Pages: 17

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

Brand: Cequent Pages: 9

Brand: Ford Pages: 37

Brand: SnapPad Pages: 5

Brand: TATA Motors Pages: 159

Brand: Gatorback Mudflaps Pages: 4

Brand: Opel Pages: 32

JEEP GL ADIATOR JT TOPPER ROOF RACK

Brand: JCROffroad Pages: 7

IVH-9000-2R440Q

Brand: Vecow Pages: 110

Brand: PEUGEOT Pages: 17

Brand: E&G Classics Pages: 4

INDICA eV2 XETA CNG

Brand: TATA Motors Pages: 24

Brand: PAC Pages: 5

Brand: Percon Pages: 49

Brand: GYS Pages: 32

Brand: Cadillac Pages: 78

Brand: Genesis Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands