Mazda 6 2011 Manual Download Page 403

Page: 403 / 522

Scheduled Maintenance (USA, Canada, and Puerto Rico)

Follow Schedule 1 if the vehicle is operated mainly where none of the following conditions
apply.

Repeated short-distance driving

Driving in dusty conditions

Driving with extended use of brakes

Driving in areas where salt or other corrosive materials are used

Driving on rough or muddy roads

Extended periods of idling or low-speed operation

Driving for long periods in cold temperatures or extremely humid climates

Driving in extremely hot conditions

Driving in mountainous conditions continually

If any do apply, follow Schedule 2 (Canada and Puerto Rico residents follow Schedule 2).

NOTE

After the prescribed period, continue to follow the described maintenance at the recommended
intervals.

Maintenance and Care

Scheduled Maintenance

8-3

Mazda6_8BG7-EC-10H_Edition1 Page403
Monday, August 2 2010 1:28 PM

Form No.8BG7-EC-10H

Summary of Contents for 6 2011











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands

Mazda 6 2011, Manual

Search results

Summary of Contents for 6 2011

Reviews:

Related manuals for 6 2011

Brands by name

Popular brands