Mazda 2013 CX-9 Owner'S Manual Download Page 515

Page: 515 / 597

Replacing Interior Light Bulbs

Overhead light (Front)/Map lights,
Overhead light (Center, Rear), Luggage
compartment light, Courtesy lights,
Vanity mirror lights

1. Wrap a small flathead screwdriver with

a soft cloth to prevent damage to the
lens, and then remove the lens by
carefully prying on the edge of the lens
with the flathead screwdriver.

2. Disconnect the bulb by pulling it out.

Overhead light (Front)/Map lights

Overhead light (Center, Rear)

Luggage compartment light

Courtesy lights

Vanity mirror lights

3. Install the new bulb in the reverse order

of the removal procedure.

8-48

Maintenance and Care

Owner Maintenance

Summary of Contents for 2013 CX-9






















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands

Mazda 2013 CX-9, Owner'S Manual

Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands