Mazda 2013 CX-9 Owner'S Manual Download Page 449

Page: 449 / 597

3. Remove the cover.

Cover

4. Attach the socket to the spare tire

carrier bolt, the jack lever to the socket,
and the lug wrench to the opposite end
of the jack lever.

Bolt

Socket

Lug wrench

Jack lever

5. Slowly turn the lug wrench

counterclockwise until the spare tire
reaches the ground and the cable
becomes loose.

Spare tire

CAUTION

Do not loosen the cable too much as
this may cause damage to the spare
tire carrier.

6. Rotate the small lever on top of the

retaining plate and pull the retaining
plate out from the center hole of the
tire.

7-6

In Case of an Emergency

Flat Tire

Summary of Contents for 2013 CX-9






















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands

Mazda 2013 CX-9, Owner'S Manual

Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands