Mazda 2013 CX-9 Owner'S Manual Download Page 491

Page: 491 / 597

CAUTION

Radiator coolant will damage
paint.
Rinse it off quickly if spilled.

Use only soft (demineralized)
water in the coolant mixture.
Water that contains minerals will
cut down on the coolant's
effectiveness.

Do not add only water. Always
add a proper coolant mixture.

The engine has aluminum parts
and must be protected by an
ethylene-glycol-based coolant to
prevent corrosion and freezing.

DO NOT USE coolants Containing
Alcohol, methanol, Borate or
Silicate.
These coolants could damage the
cooling system.

DO NOT MIX alcohol or methanol
with the coolant. This could
damage the cooling system.

Do not use a solution that
contains more than 60%
antifreeze.
This would reduce effectiveness.

NOTE

If the

“

FL22

”

mark is shown on or near the

cooling system cap, it is recommended to use
Mazda Genuine FL22 engine coolant (page
8-4).

If the coolant reservoir is empty or new
coolant is required frequently, consult an
Authorized Mazda Dealer.

8-24

Maintenance and Care

Owner Maintenance

Summary of Contents for 2013 CX-9






















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands

Mazda 2013 CX-9, Owner'S Manual

Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands