Home
/
Mazda
/
2013 CX-9
/
Owner'S Manual

Mazda 2013 CX-9, Owner'S Manual, Page: 574 / 597

Share

Page: 574 / 597

Mazda 2013 CX-9 Owner'S Manual Download Page 574

SAMPLE

WARNING

Exceeding Axle Weight Rating Limits:

Exceeding the Safety Certification Label axle weight rating limits is dangerous and
could result in death or serious injury as a result of substandard vehicle handling,
performance, engine, transmission and/or structural damage, serious damage to the
vehicle, or loss of control.
Always keep the vehicle within the axle weight rating limits.

Do not tow a trailer with this vehicle:

Towing a trailer with this vehicle is dangerous because it has not been designed to
tow a trailer and doing so will affect the drive system which could result in vehicle
damage.

Customer Information and Reporting Safety Defects

Tire Information (except Canada)

9-41

«
...
572
573
574
575
576
...
»

Summary of Contents for 2013 CX-9






















































































































































































































































































































































































































































































































































































































Reviews:

No comments