Mazda 2013 CX-9 Owner'S Manual Download Page 394

Page: 394 / 597

Erasing messages

Downloaded messages can be erased.

1. Touch the

on-screen tab.

2. Touch the message you want to erase.

3. Touch the

on-screen button.

4. Touch the

on-screen button.

NOTE

The messages stored in a device cannot be
erased.

Don't Disturb Me function

A setting can be made to not notify you of
incoming phone calls and messages.

1. Touch the

on-screen tab.

2. Touch the

on-screen

button.

3. To set, touch the

on-screen button

or the

on-screen button.

4. Touch the

on screen button.

NOTE

The following operations are possible even
when the Don't Disturb Me function is on.

Downloading messages

Downloading phone books

Downloading the incoming/outgoing call
record

Sending messages

Audio Operation Using Voice
Recognition

Audio on/off, audio mode switching, and
audio operations can be done using voice
recognition.

NOTE

(When playing a USB or iPod)

When a track is selected using voice
recognition, the track list is set to VR Playlist.

Starting the audio

The audio can be started using voice
recognition.

1. Press the talk button.

Prompt:

“

Ready

”

Say:

[Beep]

“

Turn on audio

”

4. Power to the audio is turned on.

Turning off the audio

1. Press the talk button.

Prompt:

“

Ready

”

Say:

[Beep]

“

Change mode

”

Prompt:

“

Available audio modes are:

AM, FM, FM1, FM2, Sirius, Sirius1,
Sirius2, Sirius3, USB, iPod,
Bluetooth

audio, Pandora

, CD,

AUX, Turn off audio

”

Say:

[Beep]

“

Turn off audio

”

6. Power to the audio is turned off.

Switching modes

1. Press the talk button.

Prompt:

“

Ready

”

Say:

[Beep]

“

Change mode

”

Interior Comfort

Bluetooth®

6-129

Summary of Contents for 2013 CX-9






















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands

Mazda 2013 CX-9, Owner'S Manual

Search results

Summary of Contents for 2013 CX-9

Reviews:

Related manuals for 2013 CX-9

Brands by name

Popular brands