Maxwell MW-3056, Manual Instruction

Page: 10 / 32

10
ENGLISH
IRON MW-3056 B
The iron is intended for ironing clothes and bedding
and for vertical steaming of fabrics.
DESCRIPTION
1.
Water spray
2.
Water inlet lid
3. “Continuous steam supply/self-clean” switch
4. Burst of steam button
5.
Water spray button
6.
Handle
7.
Heating element ON/OFF indicator
8.
Power cord protection
9.
Base
10.
Water tank
11.
Temperature control knob
12.
Maximum water level mark
13.
Soleplate
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA. To install RCD, contact
a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as speci-
fied in this manual. Mishandling of the unit may lead
to its breakage and cause harm to the user or dam-
age to property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the unit
operating voltage.
•
The power cord is equipped with a «europlug»;
plug it into the socket with a reliable grounding
contact.
•
To avoid fire, do not use adapters for plugging
the unit in.
•
To avoid mains overloading, do not switch on sev-
eral electrical appliances with high power con-
sumption at a time.
• Do not use the iron outdoors and in places with
high humidity.
• Place the iron on a flat stable surface or use a
stable ironing board.
•
ATTENTION! The surfaces of the iron get hot
during operation. Avoid contact of open skin
areas with the iron’s hot surfaces or outgoing
steam to avoid burns.
•
Do not fill the water tank with scented liquids, vin-
egar, starch solution, descaling reagents, chemi-
cals etc.
•
Do not switch the unit on in places where aero-
sols are sprayed or highly flammable liquids are
used.
• Make sure that the power cord is not on the iron-
ing board and it doesn’t touch hot surfaces and
sharp edges.
•
Never leave the unit connected to the mains unat-
tended. During breaks in operation and when the
iron is cooling down, put the iron on the base (in
vertical position).
•
Before plugging/unplugging the iron, set the tem-
perature control knob to the minimum position and
switch the continuous steam supply off.
•
Always unplug the iron if you are not using it.
•
Always take the power plug out of the mains
socket before filling the water tank with water.
•
The water inlet lid should be closed during iron-
ing.
•
To unplug the iron, always hold the power plug,
do not pull the power cord.
•
To avoid electric shock, do not immerse the iron,
the power cord and the plug into water or any
other liquids.
•
Before taking the iron away, let it cool down com-
pletely and pour out the remaining water.
•
Pour out water from the water tank only after
unplugging the iron.
•
Clean the unit regularly.
•
Do not touch the unit body and the power plug
with wet hands.
•
Do not allow children to touch the iron body and
the power cord during operation.
•
Do not leave children unattended to prevent using
the unit as a toy.
•
For children safety reasons do not leave polyeth-
ylene bags, used as packaging, unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
•
Do not use the unit if the power cord or the plug
is damaged, if the unit works improperly or after
it was dropped or in case of leakage.
•
Do not attempt to repair the unit. Do not disassem-
ble the unit by yourself, if any malfunction is detect-
ed or after it was dropped, unplug the unit and apply
to any authorized service center from the contact
address list given in the warranty certificate and on
the website www.maxwell-products.ru.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.
•
This unit is not intended for usage by children.
Place the unit out of reach of children during the
operation and cooling down.
IM MW-3056.indd 10 06.05.2016 10:22:27