Maxwell MW-3010, Manual Instruction

Page: 8 / 32

8
ENGLISH
IRON MW-3010
The iron is intended for ironing clothes, bedding and
for vertical steaming of fabrics.
DESCRIPTION
1. Water spray
2. Water inlet lid
3. “Continuous steam supply/self-clean” switch
4. Burst of steam button
5. Water spray button
6. Handle
7. Heating element ON/OFF indicator
8. Power cord protection
9. Iron base
10. Water tank
11. Temperature control knob
12. Maximum water level mark
13. Iron soleplate
14. Beaker
ATTENTION!
For additional protection it is reasonable to install a
residual current device (RCD) with nominal operation
current not exceeding 30 mA, to install RCD, contact
a specialist.
SAFETY MEASURES
Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as specified
in this manual. Mishandling of the unit may lead to its
breakage and cause harm to the user or damage to
his/her property.
•
Before switching the unit on, make sure that your
home mains voltage corresponds to the unit oper-
ating voltage.
•
The power cord is equipped with a Euro-plug;
insert it into a socket that has a reliable ground-
ing connection.
•
To avoid fire, do not use adapters for plugging
the unit in.
•
To avoid mains overloading, provide that no other
electrical appliances with higher power consump-
tion are connected to the same outlet.
•
Do not use the iron outdoors and in places with
high humidity.
•
Place the iron on a flat stable surface or use a sta-
ble ironing board.
ATTENTION! The surfaces of the iron get hot during
operation. Keep open skin areas away from iron hot
surfaces or outgoing steam to avoid burns.
•
Do not fill the water tank with scented liquids, vinegar,
starch solution, descaling reagents, chemicals etc.
•
Do not switch the unit on in places where aerosols
are sprayed or highly flammable liquids are used.
•
To avoid damaging the soleplate be very careful
when ironing clothes with metal zippers or but-
tons.
•
Make sure that the power cord is not on the iron-
ing board and it doesn’t touch hot surfaces and
sharp edges.
•
Never leave the unit connected to the mains unat-
tended. During breaks in operation and when the
iron is cooling down, put the iron on the base (in a
vertical position).
•
Before plugging/unplugging the iron, set the tem-
perature control knob to the minimum position and
switch the continuous steam supply off.
•
Always unplug the iron if you are not using it.
•
Always take the power plug out of the mains
socket before filling the water tank with water.
•
The water inlet lid should be closed during ironing.
•
To unplug the iron, always hold the power plug,
never pull the power cord.
•
To avoid electric shock, do not immerse the iron,
the power cord and the plug into water or any
other liquids.
•
Before taking the iron away, let it cool down com-
pletely and pour out the remaining water.
•
Pour out water from the water tank only after
unplugging the iron.
•
Clean the unit regularly.
•
Do not touch the unit body and the power plug
with wet hands.
•
Do not allow children to touch the iron body and
the power cord during operation.
•
For children safety reasons do not leave polyethyl-
ene bags, used as packaging, unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suffo-
cation!
•
This unit is not intended for usage by children.
•
Place the unit out of reach of children during the
operation and cooling down.
•
The unit is not intended to be used by people with
physical, sensory or mental disabilities (including
children) or by persons lacking experience or knowl-
edge if they are not under supervision of a person
who is responsible for their safety or if they are not
instructed by this person on the usage of the unit.
•
Do not leave children unattended to avoid them
using the unit as a toy.
•
Do not use the unit if the power plug or the power
cord is damaged. If the power cord is damaged,
it should be replaced by the manufacturer, main-
tenance service or similar qualified personnel to
avoid danger.
•
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction is
detected or after it was dropped, unplug the unit
and apply to any authorized service center from
the contact address list given in the warranty certifi-
cate and on the website www.maxwell-products.ru.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.