Maxwell MW-1753 PK, Manual Instruction

Page: 8 / 40

8
ENGLISH
steam. Do not open the lid during and right
after water boiling.
•
Do not touch hot surfaces of the thermopot.
• Be careful while carrying the unit filled with
boiling water.
• Do not carry the thermopot holding it by the
lid opening button.
• Before pouring out the remaining water let
the unit cool down, then remove the thermo-
pot lid and pour out water.
•
To avoid risk of electric shock, do not immerse
the unit, the power cord and the power plug
of the unit into water or other liquids.
•
Disconnect the unit from the mains, if you are
not using it or before cleaning.
•
Do not wash the thermopot in a dishwashing
machine.
•
Before taking the unit away for storage and
before cleaning, unplug it, pour out water
and let the unit cool down and dry.
• For children safety reasons do not leave poly-
ethylene bags, used as a packaging, unat-
tended.
Attention! Do not allow children to play with
polyethylene bags or packaging film. Danger
of suffocation!
•
Do not allow children to use the thermopot
as a toy.
•
This unit is not intended for usage by children
or disabled persons unless they are given all
the necessary and understandable instruc-
tions by a person who is responsible for their
safety on safety measures and information
about danger that can be caused by improp-
er usage of the unit.
•
Keep the unit out of reach of children and
disabled persons. Do not allow them to use
the unit without supervision of the respon-
sible adults.
•
Check the power cord and the plug integrity
periodically. Do not use the unit, if the power
cord, plug, lid or body is damaged.
•
Do not repair the unit by yourself. It may lead
to fire, electric shock or injuries. If the unit
has damages, apply to the authorized ser-
vice center.
THE UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
BEFORE THE FIRST USE
After unit transportation or storage at low
temperature it is necessary to keep it for at
least two hours at room temperature before
switching on.
–
Unpack the thermopot; remove any stickers
that can prevent unit operation.
–
Check the unit for damages; do not use it in
case of damages.
–
Before switching the unit on make sure that
its operating voltage corresponds to voltage
of your mains.
–
Open the lid (8) by pressing the button (5)
and pulling it (pic. 1).
–
Fill the thermopot with water using a suitable
bowl, do not exceed the maximal water level
mark (11) «FULL» (pic. 2).
–
Insert the power cord connector (17) into the
socket (14) on the thermopot body, and the
mains plug into the mains socket (pic. 3).
The thermopot will be switched on in boiling
mode; the «BOILING» indicator (18) will light
up on the control panel (4).
–
After water starts boiling, the thermopot will
be switched to the keep warm mode, the
«KEEP WARM» indicator (20) will light up.
–
Pour out water. To do this set the hand pump
lock (9) lever to the position « », place a
suitable bowl under the spout (3) and pour
out water pressing the hand pump (6). To
switch the electric pump on, press and hold
the «WATER DISPENSE» button (21).
Note :
- To remove foreign smells boil and pour out
water 2-3 times.
Attention! Be careful when pouring out
water to avoid getting burns by steam and
hot water.
Usage of thermopot
Open the lid (8) by pressing the button (5) and
pulling it (pic. 1).
–
Fill the thermopot with water using a suitable
bowl, do not exceed the maximal water level
mark (11) «FULL» (pic. 2).
–
Insert the power cord connector (17) into the
socket (14) on the thermopot body, and the
mains plug into the mains socket (pic. 3).
The thermopot will be switched on in boiling
mode; the «BOILING» indicator (18) will light
up on the control panel (4).
MW-1753.indd 8 28.03.2013 15:34:40