19
Pairing the RF Keypad
(1) Launch the 'iMAXWELL' APP. Tap the '+' icon to add new device.
(2) Choose 'Pairing the RF Keypad'.
(3) Give your device a name and location, then tap ’Save’.
(4) Press ‘ Pair’ and remove the plastic tab to send out the pairing signal. When the pairing
process completed, the newly paired sensor is now display in the
'Home page'
section.
Verifying the setup
Press the 'Disarm' button
, the gateway will beep once.
Note:
Maintenance Function, Disabling the system alarm when release the tamper button
(battery change).
Steps: Program mode > enter security code > Press “9” > remove keypad from the wall
bracket> change battery > remount the keypad.
3
4