![background image](http://html.mh-extra.com/html/maxwell/maxguard-pro/maxguard-pro_installation-and-operating-instructions-manual_1746513013.webp)
9
The newly added gateway is appear. Continue with pairing the camera(s), sensor(s), switch(es)
and remote control.
Pairing the Camera
(1) Connect the camera to the Wi-Fi router using the Ethernet cable supplied.
(2) Power up your camera using the power adaptor supplied and wait until for both RED
(power indicator) /GREEN (linkage indicator) indicators become steady on.
Note:
Make sure the micro SD card is inserted into the memory card slot for the
camera to record. DO NOT begin the APP setup process until both LEDs become steady
on. Pan & tilt have only one LED in green and takes about 1 min to be steady on.
Note:
You can ONLY setup using camera(s) specified compatibility with the system. If you
have previously purchased and installed compatible camera(s), follow the steps below to add
your cameras to the new system.