![background image](http://html.mh-extra.com/html/maxwell/maxguard-pro/maxguard-pro_installation-and-operating-instructions-manual_1746513045.webp)
41
ADDITIONAL USEFUL FEATURE
Using the Smart Plug as Repeater - Repeater Setup
To Activate the Repeater Function of your Smart Plug
First make sure the Smart Plug and the end Sensor has been successfully paired/connected to the
system gateway. See "Sensor Pairing" section for more details.
Step 1
Press/hold the button located on the front of the smart plug until the LED begins to flash in blue and
orange.
Step 2
While the LED on smart plug is flashing blue and orange, activate the pairing mechanism on the
end Sensor. The LED on smart plug will turn steady orange indicating the repeater pairing process
is complete.
To Deactivate the Repeater Mode
1. Unplug the repeater Smart Plug.
2. Press and hold the button in front of the Smart Plug and plug the Smart Plug back to the outlet
with the button pressed, do not let go of the button until the LED begins to flash (blue).
The LED indicator on the original repeater Smart Plug now should light up in blue, indicating the
repeater function has been deactivated.
Both Smart Plug and the end sensor will require re-pairing with Gateway to resume their normal
operation. Please see 'Sensor Pairing' section for more details.
Note:
You will not be able to control the end Sensor if the smart
plug(repeater) is unplugged. Reinstate the Smart Plug to regain
the control and communication between gateway and end Sensor.