![background image](http://html.mh-extra.com/html/maxwell/maxguard-pro/maxguard-pro_installation-and-operating-instructions-manual_1746513033.webp)
29
Basic Setting
This section allows you to configure the camera security code, time zone, daylight savine, and
Wi-Fi setting.
Security Code
The Security Code is a specific security code to access the camera. The default password
of the camera is 123456. Please use this function to change the default password into your
personal security code.
Time Zone
The drop-down list shows the world time zone. Select the time zone that will work the best
for you. If your date/time is during the daylight saving time period, please check the Daylight
Saving box to adjust the system time properly.
Daylight Saving
Tap to enable/disable the daylight saving function.
Wi-Fi Setting
The Wi-Fi setting allows you to choose the wireless connection and setup the Wi-Fi
environment.
When you tap the “Manage Wi-Fi network” button, the system automatically scans the nearby
network and shows the available Wi-Fi routers in the drop-down list. Choose the appropriate
Wi-Fi router and enter the Wi-Fi router password if necessary. Due to security concerns, it is
suggested to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network.
Note:
1. Change password in system information page accordingly.
2. If you forget the Device Security Code, press and hold the reset button to reset the
system to factory default. All settings will be restored to factory default. You will need to
configure your camera from the start.
Note:
1. When the Wi-Fi connection is completed and you unplug the Ethernet cable, the camera
will reboot and it will take several minutes to establish the connection. Please re-launch
the APP when you see the green signal indicator lights up.
2. The WAPP camera is designed to work with the legal Wi-Fi channels in your region.
Please refer to your Wi-Fi router manual to choose an appropriate channel for WAPP
camera.
3. If the camera fails to connect to the Wi-Fi router, please hold down reset button for 2
seconds to reset the system and repeat registration process again.