![background image](http://html.mh-extra.com/html/maxwell/maxguard-pro/maxguard-pro_installation-and-operating-instructions-manual_1746513039.webp)
35
Sequence Scenario
Allowing the system to automatically react to the sudden situation and carry out other pre-
defined tasks. For example, when the motion sensor detects motion, the camera will
immediately rotate to the scene and start to record, and the light will turn on.
To setup the sequence scenario(s), follow the steps below:
1. Tap to select one of the
'initiator'
(If...) from the list (example: door/window contact).
2. From the list. tap to turn on/off the
'follow-uper'
(Then..., example: camera).
3. Tap the 'Save' when you're done.
Enable for scenario to function properly, please make sure the sensor(s) in the list is activated
(a). For camera, you would want to check mark the 'Record' so camera will record video and
'View'
for auto video screen popup (b). Without SD card inserted, you can only view but not
record the video fooatge.