![background image](http://html.mh-extra.com/html/maxwell/maxguard-pro/maxguard-pro_installation-and-operating-instructions-manual_1746513016.webp)
12
(4A) Auto Pairing Method
(4B) Manual Pairing Method
Remove the insulating plastic tab
to send out the pairing signal.
Press the
'Pairing'
button located
inside the battery compartment.
Verifying the Setup
After complete pairing, facing the motion sensor to the wall where no movement can be
detected, waiting a few minutes for the sensor to complete condition analysis. Wave your hand
in front of the sensor and alert indicator should appear on the home page.
Pairing the Power On/Off Switch
(1) Launch the 'iMaxwell' app. Tap the '+' icon to add new device.
(2) Choose 'Power Switch'.
(3) Give your device a name and location, then tap ’Save’.
(4) Press ‘ Pair’ and plug in the power switch to the outlet to send out the pairing signal. When
the pairing process completed, the newly paired sensor is now display in the
'Home page'
section.
Note:
To conserve battery power, the Motion Sensor will be temporarily deactivated for
2 mins after every trigger event. This is also good for controlling the unnecessary push
3
4