SECTION 2
OPERATION
35
10
TROUBLESHOOTING
If you have a problem with your unit, before
contacting the technical service, check the following:
PROBLEM
The unit does not operate at all
(The LED on the front panel does not come on).
The unit menus appear on the TV but there
is no sound or picture.
During digital programs, audio interruptions
and video skew occurs.
A digital program that was previously
watched is not available any more.
Remote control is not working.
Picture is available, but weak or no sound.
REASON
Make sure the power connection is correct.
The input power fuse may have blown.
Make sure that the unit is connected to the
Omnisat antenna correctly. Also make sure
that the program settings of the unit are set
to one of the programs included in the
satellite that you want to watch.
Signal emitted by the antenna is not strong enough.
Make sure that there is no problem with the cable.
The frequency, polarity, symbol rate or PID values of that
program might have changed.
Check batteries and replace if required. Ensure that the
sensor on the unit is not obscured.
Make sure that the volume of your TV and
satellite receiver is at an adequate level.
