IMPORTANT SAFETY INSTRUCTIONS
Do not open the cover of the unit. No user-serviceable parts inside. To open the cover cancels the
guarantee of the unit. Refer to an authorised dealer.
Make sure that the ventilation holes of the receiver are not blocked, this prevents overheating.
To protect your unit from permanent damage do not connect non-recommended equipment.
The receiver supplied with this system is not a standard satellite receiver. It cannot be used with a normal
antenna dish. It can only be used with the Maxview Omnisat Dome. If you connect an LNB to the output
of this unit it may cause damage to the LNB or receiver.
The antenna part of the system installed on the vehicle adds extra height. It is very important to be
aware of this extra height when the vehicle is on the move.
On installation personal safety should be considered when using power/hand tools and working at height.
The user is legally responsible for the antenna mounted on top of the vehicle.
BEFORE STARTING THE INSTALLATION - PLEASE READ
Always follow manufacturer’s instructions
Decide where you wish to mount your Omnisat Dome, taking into account any obstacles that might interfere
with the tracking of the satellite. It is recommended that you do a dry run to find the best position.
The installation surface should be smooth, flat and rigid.
Important: All 4 Fixing Plates must be level to avoid distortion of the system (see the next page).
Before starting the installation of the antenna, make sure that the surface on which the antenna is to be
mounted is dry and clean.
Please make sure that all connections have been made to the system before the power is connected,
failure to do so may result in damage to the system and may void the guarantee.
RECOMMENDED PARTS/TOOL LIST
Drill and drill bits
Screwdriver
Adhesive, such as Sikaflex®-512 and/or cleaner and activator*
Multimeter
Side cutters and pliers
* always follow manufacturers instructions.
40
5
GUARANTEE
The Maxview Omnisat Dome is guaranteed against defective parts or workmanship for
2 years from time of purchase. This excludes any malfunction caused by improper use,
accidental or malicious damage or removal of outer cover. This does not affect your
statutory rights.
EXEMPTIONS
Maxview is not liable for:
1. Damage caused by fires, natural disasters (such as thunder, earthquake, etc.), a third
party, accidents, misuse or any other improper use.
2. Damage caused by incorrectly following the instructions described in the operating or
installation manual.
3. Malfunction through simultaneous use of this product and other non-recommended equipment.
