Maxview MXL002, User Manual

Page: 19 / 22

26 19
AUTOMATIC SEARCH
> When in the “Main Menu”, go to “Installation” by
using “ ”/“ ” and “
✘
”/“
✘
” buttons and press the
“ OK ” button. Press the “ OK ” button again to enter
the “Automatic Search” option. Select the “All Scan”
sub-menu.
> A satellite can be selected by highlighting “Satellite”
and using the “ ”/“ ” buttons.
> If “Method” is highlighted “Fixed Sr” or
“Transponder” can be selected. If you select
“Transponder” as “Method”, all relevant
transponders will be searched. If you want to search
by symbol rate, select “Fixed Sr” in “Method” and
then enter the “Symbol Rate” by using “ ”/“ ” or
number buttons.
> Select “Only TV”, “Only Radio” or “All” scan type in
“TV/Rad” by using “ ”/“ ” buttons.
> If you want to scan for Free-to-Air channels,
highlight “FTA/Scrambled” and select “FTA Only”. If
you want to scan for both Free-to-Air and other
channels, select “All”.
> “Network Search”: A network information table is
sent by some programs and it shows the location of
other programs. If “Network Search” option is “Yes”,
the receiver tries to find the new programs according
to the network information table.
✘ ✘
✘ ✘
✘ ✘
✘ ✘
> MOVE : Press the “ GREEN ” button to enter
“Operation” menu in the “Channel List”. Select by
using “ ”/“ ” buttons. “Move” operation is
activated. When you press the “
OK ” button the menu
on the right appears. The “Channel List” appears as
the left column and the channels to be moved as the
right column. Select the channel you want to move
and press the “
OK ” button. That channel goes to the
right column. In this menu press the “ GREEN ” button
to go to the list on the right. If you select a channel
and press the “
OK ” button again that channel goes
back to the left column, it can be removed from the
channel list to be moved. All the channels to be moved
are in the right column.
> Press the “ YELLOW ” button to move the selected
channels to their desired position. In the left column,
by using “
✘
”/“
✘
” buttons go to the place the chan-
nels are to be moved to and press the “ OK ” button. All
the channels that are moved will go to the top of that
selected channel position.
> SWAP : Press the “ GREEN ” button to enter
“Operation” menu in the “Channel List”. Select by
using “ ”/“ ” buttons, “Swap” operation is
activated. Highlight the first channel that you want
to swap and press “
OK
” button. Then highlight the
second channel that you want to swap, press the “ OK ”
button again. The two channels have now replaced
each other.
✘ ✘
✘ ✘