MaxTronic Orion 410ST, User Manual

Page: 51 / 100

Maxtronic Orion 410ST User Guide
41
Syst
em
S
et
up
Scr
e
en
Factory Defaults
This option reverts the system to the factory
default settings. Before proceeding with this
option, be sure to make a backup of the configu-
ration file. All settings will be erased and reset
to the default values. This will only happen if
the drives are still installed. If the drives have
been removed, this process will only refresh the
NVRAM. This effectively makes the unit as
when brand new.
UPS
• UPS Watch : Select Yes to enable or No to
disable UPS watch function.
–
UPS Selection : The system supports APC
Back-UPS ES 500 and OPTI ES 550C, PS
1000B via the USB interface. Choose
from the drop-down box.
– Time to shutdown : If the UPS watch
option is enabled, the default shutdown
delay is 5 minutes. In the case of a
detected power loss, the system will shut
down immediately.
– Detailed Watch : If ‘Yes’ is selected, the system will shutdown automatically if the
remaining battery charge falls below 5%, or if battery run time is below 5 minutes,
whichever occurs first.
– Send message to connecting clients : If ‘Yes’ is selected, the system will send a mes-
sage to connecting clients when a power event has been detected.
– Update : Click to save all changes.
– Cancel : Click to cancel all changes.
• All system settings, users, user quotas, created public shares
and privileges will be erased when you restore factory default
settings.
• The only way to restore previous system data, after reverting to
factory settings, is from a saved backup file.