MaxTronic Orion 410ST User Manual Download Page 63

Page: 63 / 100

Maxtronic Orion 410ST User Guide

Stor

age
Se
tu

p Settings

Volume Setup

The following shows the options available in the Volume Setup menu:
The following options are available:

•

Add

: Creates a new storage volume.

•

Delete

: Deletes a specific storage volume.

•

Modify

: Select a storage volume and click

‘Modify’ to modify the required fields. This
mode allows only the rebuilding speed to be
changed.

•

Format

: Formats a specific storage volume.

Adding a storage volume

Click ‘Add’ to go to the ‘Add Volume’ screen:

Here you can specify what kind of volume you

would like to create - Single disk, RAID 0,

RAID 1, RAID 3 or RAID 5. Select one of the

free disks available and click on the right arrow

button to move the disk into the ‘Single disk’

column.

Click ‘OK’ and the new volume will be created.

Summary of Contents for Orion 410ST





































































































Search results

Summary of Contents for Orion 410ST

Reviews:

Related manuals for Orion 410ST

Brands by name

Popular brands

MaxTronic Orion 410ST, User Manual

Search results

Summary of Contents for Orion 410ST

Reviews:

Related manuals for Orion 410ST

Brands by name

Popular brands