MaxTronic Orion 410ST, User Manual

Page: 62 / 100

52
Maxtronic Orion 410ST User Guide
Storage Setup
Settings
Volume Information:
• Name : Displays storage volume name.
• Type : Displays storage volume type.
• Capacity : Displays storage volume capacity.
• Used Space (MB) : Displays the amount of space in use.
• HDD : Includes one of more HDDs. Displays the HDD combination used by the storage
volume.
• Status : One of the following will be displayed:
For more details related to a storage volume,
double-click the ‘Volume name’:
Not Used The storage volume is not in use
In Use The storage volume is operational
Data Synchronization When the system is set up for the first time or shut down
abnormally and if there is a RAID-1, RAID-3, or RAID
5 set up in the storage volume, the system will automati-
cally duplicate backup data in RAID-1. For RAID-3 or
RAID-5 setup, the system synchronizes with the storage
volume data according to the associated location of the
parity bit.
Data Recovering The system supports RAID-1, RAID-3, and RAID-5 hot
swap. When storage volume setup is any of these three
types, the system automatically rebuilds all data in the
original HDD after the replacement of any HDD.
Data Synchronization
Delayed If a storage volume is performing data synchronization,
actions of other storage volumes will be delayed until the
operation of the first storage volume is completed.
Formatting Storage volume is being formatted. The progress status
will be displayed in this field.