GB
It is important to use the right paper for each job. For rough sanding use grain sizes up to 80, f
wood
as larch, pine or spruce use papers from 60grit t
For dense hardwood as beech or maple, the grain
sizes with up to 220 can be used.
Switch o
connect the power.
The sanding plat
ed with a hook and eye system for sanding sheets. This enables rapid applica
of new sheets without the need for a tensioning system. Before applying a new sheet, tap the dust from
the hook and eye fastening of the sanding plate. Stretch the sanding paper over the sanding plat
ensure that the holes (4) of the plate and the disc match up.
Dust extr
Connect the dust c
to the dust extr
connect
evel, and empty
frequently. It is possible to employ and external vacuum by using a suitable adapter (ask in shop). Always
work with a dust extr
system connected.
Swit
ching on and off
1. Connect the plug to a power socket
2. Switch on con
ra
ress bu on(2)
3. Swit
ch off
con
ra
ress bu on(2)
Sanding
1. P
n re sanding surface on the piece of work
2. Switch the machine on and guide it over the surface to be sanded using cir
ressure to the machine when sanding, the weight of the machine itself is usually su
nt to
ensure op
rev
good r
ete several sanding processes using sand
paper that gradually ge
r.
Polishing
1. Apply polish using a cross-coat method and allow drying slightly before polishing. When you have
completed your work, reduce the pressur
rom the piece you are working on, and then
switch the machine o .
CLEANING AND MAINTANCE
CAUTION! Before performing any care or maintenance work, disconnect from the power.
Use a dry brush to clean the dust extr
not use solvents! Then dry well. Remove the dust c
rom the plas
to empty. Empty
carefully, try not to create dust. Do not breathe in saw dust! Wash out the bag in cold soapy water and
allow drying.
Before each use, check the machine, the cable and accessories to ensure that they are not damaged. Have
any necessary repairs completed by a specialist.
Machines that no long
roperly should be disposed o correctly in accordance with the local
regula
ENVIRONMENT
Do not dispose of electric tools, accessories and packaging together with household waste material -
in observance of European Dir
v
EC on waste of electric and electronic equipment and its
implementa
cordance with na
aw, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compa
recycling facility.
(Fig.4)
(Fig.1)
(Fig.2)
