gate shut-off switch
Turn this feature
ON
while servicing the gate operator. This switch disables all OPEN/CLOSE devices
BUT
the JOG LEFT/RIGHT buttons
on MC-200 so gate can not accidentally get activated while operator is being serviced.
Only the
Jog Left
or
Jog Right
buttons will operate
gate when Gate Shut-Off switch is turned
ON
.
IMPORTANT:
When the Gate Shut-Off switch is turned
ON,
any OPEN/CLOSE command given to gate operator will just
“BEEP”
for a few seconds and ignore command.
TECHNICIAN MAINTENANCE TIP:
One wire can be unplugged from the back of the
Gate Shut-Off switch
after servicing the
operator to prevent the switch from accidentally being turned
ON
during normal operation. Plug the wire back in and turn
ON
the
switch
only
while servicing the operator. This can prevent an unnecessary service call by a technician when the only thing wrong
with a malfunctioning operator is the
Gate Shut-Off
switch has accidentally been turned
ON
but the owner is unaware of this.
MAX MC-200 motor controller
PhotoCell Edge
UL
Entrap
1
2
Limit SW
ON-LINE
MATRIX
JOG
JOG
LEFT RIGHT
Jog L
T
Jog R
T
GND
Edge 1
Edge 2
Photo
Cell
ERD
Motor
OverLoad
POWER
MC-200
Motor Controller
16
15 14 13
12
3
4
5
MAX
LED ON
Sensitivity
Edge
ERD
Gate Shut-Off Switch
11
UL 325 2016 Standard-MAX Quick Install Rev 8
