Chamberlain AccessMaster User Manual Download Page 1

The Chamberlain Group, Inc.

845 Larch Avenue

Elmhurst, Illinois 60126-1196

www.liftmaster.com

Contents

Important Safety Instructions ......... 2-3

Operation....................................4

Using the Door Control ....................5

Programming - Door Control Panel .....6

Programming - Remote Controls ........7

To Erase the Memory ......................7

To Open the Door Manually ..............8

Adjustment ..................................9

Program the Travel ...................... 10

Test the Safety Reversal System ...... 11

Test the Protector System

®

 ............ 11

Maintenance .............................. 12

Troubleshooting ...................... 13-14

Repair Parts .............................. 15

Warranty .................................. 16

CONTRACTOR Series 
Garage Door Opener

■ 

 Please read this guide and the enclosed safety materials carefully!

   The door WILL NOT CLOSE unless the Protector System

®

 is connected and 

properly aligned.

■ 

  Periodic checks of the garage door opener are required to ensure safe 
operation.

   This garage door opener is ONLY compatible with Security

 2.0™ accessories.

   DO NOT enable the Timer-to-Close feature if you are installing the garage 

door opener on a one-piece door. The Timer-to-Close is to be used ONLY with 

sectional doors.

  Attach enclosed warning labels to the location indicated on label.

Serial Number:

Date of Purchase:

 

User’s Guide

FOR RESIDENTIAL USE ONLY 

Write down the following information 
for future reference:

The images throughout this manual are for reference and your product may look different.

CONTACT INFORMATION

Leave this User’s Guide with the homeowner.

..

Summary of Contents for AccessMaster

















Reviews: