MaxiCheck MX808TS User Manual Download

Page: 18 / 172

Getting Started

Make sure the Display Tablet has sufficient battery or is connected to the

external power supply (see

Power Sources

on page 5).

NOTE

The images and illustrations depicted in this manual may differ slightly from

the actual ones.

Powering Up

Long press the Lock/Power button on the top right side of the Display Tablet

to switch the unit on. The power LED light will illuminate green. The system

boots up, and shows the lock screen. Slide the Lock icon to the left to enter

the MaxiCheck Job Menu or slide to the right to unlock.

Figure 3-1

Sample MaxiCheck MX808TS Job Menu

1.  Application Buttons
2.  Locator and Navigation Buttons
3.  Status Icons

Summary of Contents for MX808TS













































































































































































Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands

MaxiCheck MX808TS, User Manual

Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands