MaxiCheck MX808TS User Manual Download

Page: 111 / 172

104

4. Select the images that need to be deleted by tapping the thumbnail

images, the selected thumbnail displays a tick icon at the bottom

right corner.

5. Tap the

Delete

button, and then

Delete Selected

, then the

selected images will be deleted.

PDF Files

The PDF section stores and displays all PDF files of saved data. After

entering the PDF database, select a PDF file to view the stored information.

This section uses the standard Adobe Reader application for file viewing

and editing, please refer to the associated Adobe Reader manual for more

detailed instructions.

Review Data

The Review Data section allows you to playback the recorded data frames

of live data streams.

On the Review Data main screen, select a record file to playback.

Figure 7-3

Sample Data Playback Screen

1. Drop-down Toolbar – tap the button at the top center of the screen to

open the Drop-down Toolbar.

2. Main Section – displays the recorded data frames.
3. Navigation Toolbar – allows you to manipulate data playback.

Summary of Contents for MX808TS













































































































































































Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands

MaxiCheck MX808TS, User Manual

Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands