MaxiCheck MX808TS User Manual Download

Page: 160 / 172

153

Function Viewer

The Function Viewer allows you to search the functions supported by our

tools and the version information. There are two ways of searching, either

by searching the tool and the vehicle or searching the functions.



To Search by the vehicle

1. Tap the

Function Viewer

application on the MaxiCheck Job Menu.

The Function Viewer application screen displays.

2. Tap the tool name on the top left to drop down the tool list, tap the

one you want to search.

Figure 17-1

Sample Function Viewer Screen 1

3. Tap the vehicle brand, model, and year you want to search.
4. All the functions support by the selected tool for the selected

vehicle displays with three column, function, sub function, and

version.

Summary of Contents for MX808TS













































































































































































Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands

MaxiCheck MX808TS, User Manual

Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands