40
NOTE
This mode supports Graph Merge for 2 to 3 parameter items only, so select
no less than 2 or no more than 3 items each time when making graph
merge.
To cancel Graph Merge mode, tap the drop-down button on the right
side of the parameter name, and select a data display mode.
Show
– tap this option to switch between the two options; one displays
the selected parameter items, the other displays all the available items.
Setting
– tap this button to open a setting screen, which allows you to
set the trigger mode, recording duration, and various threshold values
for data recording, and make other controls.
Figure 4-14
Sample Setting Mode in Live Data
There are four navigation buttons on top of the
Setting
mode screen.
Selected Button – displays the configuration screen on which you can
set the threshold values, an upper limit and a lower limit, for triggering
the buzzer alarm
.
This function is only applied to the Waveform Graph
display mode.
a) MIN – tap to open a virtual keyboard, allowing you to enter the
required lower limit value.
b) MAX – tap to open a virtual keyboard, allowing you to enter the
required upper limit value.
Summary of Contents for MX808TS
Page 80: ...73 Figure 5 30 Sample IMMO Note Screen Figure 5 31 Sample Program Key FOB Screen ...
Page 83: ...76 Figure 6 2 Sample Vehicle Manufacturer Selection Figure 6 3 Sample Vehicle Model Selection ...
Page 128: ...121 Programmer Update Coming soon ...
Page 162: ...155 Figure 17 3 Sample Function Viewer Screen 3 ...
