MaxiCheck MX808TS User Manual Download Page 125

Page: 125 / 172

118

MaxiVCI Mini Update

Update via Display Tablet

Before update the VCI software, please make sure the Display Tablet

network connection is stable.



To update the MaxiVCI Mini software

1.  Power on the Display Tablet.
2.  Connect the MaxiVCI Mini to Display Tablet via USB.
3.  Tap the

VCI Manager

application on the MaxiCheck Job Menu of

the Display Tablet.

4. Select

Update

from the connection mode list.

5. The current version and the latest version of the VCI software will

be displayed after a few seconds, click

Update Now

to update the

VCI software if available.

Update via PC

1. Down the Maxi PC Suite from

www.autel.com

> Support & Updates >

Firmware Downloads > Update Client, and install it onto your PC.

2. Connect the MaxiVCI Mini to a PC using a USB cable.
3. Run the

PC Suite

on your PC which is installed after the installation of

Maxi PC Suite

and click MaxiVCI Mini icon on the Device Selection

window.

4. The driver will automatically detect the updates of the device.
5. Click

Update

to complete the operation if an update is available.

Summary of Contents for MX808TS













































































































































































Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands

MaxiCheck MX808TS, User Manual

Search results

Summary of Contents for MX808TS

Reviews:

Related manuals for MX808TS

Brands by name

Popular brands