www.maxcessintl.com
HEB250 Brake
MI 850A346 1 B
Page 7
Safety Information:
To ensure safe and problem free installation of the pneumatic brake device, the brake must be properly transported and
stored, professionally installed and placed in operation. Proper operation and maintenance will ensure a long service life
of the device. Only persons who are acquainted with the installation, commissioning, operation and maintenance of the
system and who possess the necessary qualifications for their activities may work on the pneumatic brake. Note: The
safety information may not be comprehensive.
The content of these instructions must be read and followed.
All national, state, and local requirements for installation, accident prevention and environmental
protection must be followed.
The safety instructions and symbols described in this section are used to avoid possible dangers for users and to prevent
material damage.
SIGNAL WORD
Source of danger and its results.
Avoiding dangers.
The signal word WARNING refers to the danger of moderate to severe bodily injuries or death.
The signal word CAUTION refers to the danger of slight to moderate bodily injuries or material damage.
WARNING/CAUTION
– General danger or important note
Reference to general hazards that may result in bodily injuries or damage to device or material.
WARNING/CAUTION
– danger due to crushing
Reference to danger of injury caused by crushing.
WARNING/CAUTION
– danger due to cutting
Reference to danger of injury caused by cutting.
WARNING/CAUTION
– danger due to voltage, electric shock
Reference to danger of injury caused by electric shock due to voltage.
WARNING/CAUTION
– danger due to hot surfaces
Reference to risk of injury caused by burning.
WARNING/CAUTION
– danger due to flying objects
Reference to risk of injury caused by burning.
