www.maxcessintl.com
HEB250 Brake
MI 850A346 1 B
Page 8
Basic Safety Information:
Proper Use:
The HEB brake is intended to produce braking torque proportional to input pneumatic pressure to create web tension in
an unwind roll of material.
Intended for indoor operation only.
Improper Use:
Operation outside the technical specifications.
Operation in an Ex-area or intrinsically safe area.
Any other use than the proper use shall be deemed inappropriate.
Installation and commissioning:
Any brake which is damaged must not be installed or put into operation.
Only perform installation, maintenance or repair tasks on the brake when the machine has been stopped and is
secured from being turned on.
Only perform installation, maintenance or repair tasks on the brake when there is no electrical power in the
system.
The brake must be securely mounted before being placed in operation.
Only replacement parts obtained from Fife may be used.
No modifications may be made to the brake.
Do not place electrical cables under mechanical strain.
Do not bring this brake into contact with water or other fluids. Grease or oil on the internal brake parts will cause a
loss of torque.
Decommissioning:
The brake must be disposed of in accordance with all the applicable national, state and local regulations.
Operation:
CAUTION
– Burns can result from touching the brake surface during operation.
The brake device converts mechanical motion into heat and the surface of the brake will become hot during
operation. Appropriate guards must be installed by the user according to his use of the product.
Maintenance and repair:
WARNING
– Danger of injury from crushing.
Maintenance and repair tasks on the brake must be performed only when the machine has been stopped
and has been secured from being turned on again.
