www.maxcessintl.com
HEB250 Brake
MI 850A346 1 B
Page 12
How to mount the brake using adapter plate (HEB250BKPLT):
A
Mount adapter plate to existing safety chucks, chucks, bearing block, or machine frame surface using existing bolt
hole patterns in adapter plate or attached to customer supplied bracketry or custom weldments. Proceed to step B
in the previous section.
How to mount brake using adapter plate to Tidland safety chuck:
A
The HEB250BKPLT adapter plate is designed to fit the lagerdeckel (bearing end plate) for Tidland safety chuck
sizes 22-30, 30-40, and 40-50. Stock chucks use M6 bolts to secure the lagerdeckel to the chuck housing. These
holes must be re-drilled and tapped to M8 or the M8 version of the aforementioned chucks must be ordered.
Remove the existing (4) ea M6 or M8 countersunk bolts from the lagerdeckel and replace with (4) ea M8 socket
cap head screws. These screws are used to attach the adapter plate and the bearing end plate to the safety
chuck. Tighten to a torque of 40 Nm [29.5 lb-ft]. Proceed to step B in the previous section.
