www.maxcess.com
FIFE-500 MAX Narrow Web Guide
MI 2700XXXXX 18
CHAPTER 4
GAIN
44 / 77
4.6 GAIN
The gain menu is used to view or set the system gain for the
active sensor mode.In servo centering mode, it is used to view or set the
gain of servo centering operation.
Navigation:
MANUAL / SERVO-CENTER / AUTOMATIC
SETUP
GAIN
If the gain screen is accessed while the system is in AUTOMATIC/SERVO-
CENTER mode, it will appear as shown below.
Use the smaller arrows buttons to decrease or increase
the system gain, or for fast gain changes use the slider control.
The gain value is applied as soon as it is changed while in this
menu, so the effects of gain changes can be observed if the
system is in Automatic mode. The graph area shows the amplified
output of the SENSOR IN AUTOMATIC MODE or the amplified
output of the SERVO-CENTERED sensor signal to provide feedback
about guide movement as the gain is changed.
Press ACCEPT to save changes and return to the previous
screen.
Press CANCEL to exit without saving changes and return to
the previous screen. If the gain has been changed, it will be
restored to its previous value.
If the system is in Manual mode, the Gain screen will have an
additional button (as shown below) to allow the Autosetup function
to be initiated from this screen, if desired.