4-14
MENU DESCRIPTIONS
www.maxcessintl.com
FIFE-500-XL
MI 2-267 1 D
COLOR TEST This menu is used to verify display screen control signals
by providing configurable color gradient screens.
Navigation:
MANUAL / SERVO-CENTER / AUTOMATIC
SETUP
SERVICE
COLOR TEST
The six slider controls can be used to vary the red, green, and blue
brightness for the left and right sides of the screen. (If the Vertical mode is
selected, the sliders control the top and bottom colors respectively.)
Test The Test button cycles through a sequence of gradient settings
which would most likely identify hardware related signal issues.
Horz/Vert This control selects the gradient direction (horizontal or
vertical).
The red, green, and blue buttons on each side cycle through an 8-bit
binary sequence selected to drive each signal separately in the color
circuitry. Small changes present in this sequences typically produce no
visually discernable screen change and are only used in conjunction with
more detailed service activities.
Color values vary from 0 to 255, with a value of zero representing no color
and 255 representing maximum color. To specify a color value, touch the
respective red, green or blue edit control and enter the desired value.
Press the ACCEPT button to return to the previous screen.
