Matsusada DOEF Series, Instruction Manual

Page: 118 / 124

9 Voltage Shift Option
110
DOEF series
Matsusada Precision
Table: Setting unit, minimum/maximum values for each command (SCPI command)
Function Command
Setting
unit
Min setting Max setting
No. of
significant digits
DC voltage setting [SOURce]:VOLtage:DC(?) 0.01V -115.00V +115.00V 5 digits
Start DC voltage setting
for soft start
SSTArt:DCVStart(?) 0.01V -115.00V +115.00V 5 digits
End DC voltage setting for
soft start
SSTArt:DCVEnd(?) 0.01V -115.00V +115.00V 5 digits
Start DC voltage setting
for soft stop
SSTOp:DCVStart(?) 0.01V -115.00V +115.00V 5 digits
End DC voltage setting for
soft stop
SSTOp:DCVEnd(?) 0.01V -115.00V +115.00V 5 digits
Each step DC voltage
setting for sequence
SEQuence:EDIT:STEP
DCVSET(?)
0.01V -115.00V +115.00V 5 digits
Positive voltage limit [SOURce]:VOLTage:PROTect:UPPer(?) 0.1V +5.0V +115.0V 4 digits
Negative voltage limit [SOURce]:VOLTage:PROTect:LOWer(?) 0.1V -5.0V -115.0V 4 digits
Positive current limit [SOURce]:CURRent:PROTect:UPPer(?) 0.1A 0.1A
60% to 110%
of rating
current
✽
1
4 digits
Negative current limit [SOURce]:CURRent:PROTect:LOWer(?) 0.1A -0.1A
-110% to 60%
of rating
current
✽
2
4 digits
Voltage cutoff [SOURce]:VOLTage:PROTect:OVP(?) 0.1V 0.1V 115.0V 4 digits
Voltage effective value
readout
MEASure
：
VOLTage
：
RMS 0.01V 5 digits
Voltage DC value readout MEASure
：
VOLTage
：
DC 0.01V 5 digits
Voltage AC value readout MEASure
：
VOLTage
：
AC 0.01V 5 digits
Voltage max value
readout
MEASure
：
VOLTage
：
MAXimum
0.1V 4 digits
Voltage min value readout MEASure
：
VOLTage
：
MINimum 0.1V 4 digits
✽
1 It will be determined depending on the positive voltage limit protection value.
✽
2 It will be determined depending on the negative voltage limit protection value.