Matsusada DOEF Series, Instruction Manual

Page: 41 / 124

4 Operation
33
DOEF series
Matsusada Precision
7. Staring phase at a sine wave and On-duty at a square wave in Main Set1
In the case of a sine wave setting, the starting phase can be set. In the case of a square wave
setting, the on-duty can be set.
Use the leftward
“◄” movement switch or rightward “►” movement switch to move the digit
and increase or decrease the value of the digit by turning the DIAL.
[Starting phase]
Setting range: 0.0 to 360.0 deg
Setting unit: 0.1 [deg]
[On-duty]
Setting range: 10.0 to 90.0 %
Setting unit: 0.1 %
Fig. Sine wave is selected.
Fig. Square wave is selected.
DIAL:
Increases or decreases the
value of the digit.
Turn it clockwise to increase
the value and
counterclockwise to decrease
one.
Leftward
“
◄
” movement switch:
Moves to the left digit by pressing it.
Rightward
“
►
” movement switch:
Moves to the right digit by pressing it.
Wave SINE
SPhs 90.0deg
ZeroPhs ON
Set the waveform to the sine wave.
The setting of the starting phase is shown.
Wave SQUA
Duty 55.0%
ZeroPhs ON
Set the waveform to the square wave.
The setting of the on-duty is shown.