Matrox Productiva G100 Multi-Monitor Series – User Guide
31
3
Right-click the Windows desktop background, then click
Properties
Settings
.
Windows may prompt you that the display settings are incorrect for the current
mode; click
OK
to continue.
4
Move the
Desktop area
slider down to its lowest setting, then click
OK
.
5
Restart your computer normally.
6
With the Matrox
Monitor
property sheet, select monitor settings for each
display, then adjust your display settings. For more information, see the online
Matrox PowerDesk guide.
Solution
Windows 98 (if your primary display is usable):
1
Right-click the Windows desktop background, then click
Properties
Settings
.
2
In the desktop preview area, right-click the display you want to configure, then
click
Properties
Monitor
Change
.
3
From the monitor list, select the monitor model for the display you selected.
(For more information on monitor selection, see Windows online help.)
4
Click
OK
OK
OK
.
5
Repeat steps
1
–
4
for each monitor connected to your computer.
Solution
Windows 98 (if your primary display is unusable):
1
Press [Ctrl]+[Alt]+[Del] twice to restart your computer.
2
Before Windows starts, press [F5] to enter “safe mode”.
3
Right-click the Windows desktop background, then click
Properties
Settings
.
4
Move the
Desktop area
slider down to its lowest setting, then click
OK
.
5
Restart your computer normally.
6
With the Microsoft
Monitor
property sheet, select monitor settings for each
display, then adjust your display settings. For more information on monitor
selection, see Windows online help.
Problem
Built-in network card doesn’t work after multi-monitor graphics
card is installed
Cause
The installation of a multi-monitor graphics card may have caused your computer
to reallocate system resources.
Solution
Try reinstalling your network drivers.
