Matrox Mura D-Series, System Builder'S Manual

Page: 62 / 88

62 Matrox Display Wall – System Builder’s Guide
ASUS WS Z390 Pro
Configurations
Performance considerations with D-Series controller
D-Series based controllers Third-party based controllers
Validated Yes No foreseeable compatibility issues
Maximum number of cards
supported
4
Maximum supported
Mura IPX Series
3
Maximum supported
D-Series
4
Motherboard ASUS WS Z390 Pro
Chipset Intel Z390
Processor Intel® Core™ I5-9600K CPU @ 3.70 GHz
Intel® Core™ I9-9900K CPU @ 3.60 GHz
Heatsink (for CPU) LGA 1151
System BIOS version 0701, 2019-05-24
System memory 32 GB DDR4
Chassis Chenbro RM41300-FS81
Power supply 850 W (P/N:EVGA Supernova 850G3)
PCIe expansion slots

4 PCIe x16 3.0 slots (x16 mechanical, x16 / x8 electrical)

1 PCIe ×4 3.0 slot
Notes  The chassis must be ordered from Chenbro. Power supply isn’t included with the chassis.

The chassis fans must run at full speed. To change the fan speed, go to the system BIOS main page (EZ
mode)
 select
QFan Control
 select the header to which the fans are connected  change from
Standard
to
Full Speed
and apply the changes.
 Make sure you have the following settings for Above 4G Decoding. In the system BIOS main page, go to
Advanced

Boot
, then set
Above 4G Decoding
to
ON
and
First VGA 4G Decode
to
Above_4G
.
Slot
D-Series based controller Third-party based controller
Main Options Main Options
PCIEX16_1 D1480 B Third-party graphics hardware
PCIEX16_2 MURAIPXI-E4JHF A, B MURAIPXI-E4JHF A
PCIEX4_1 N/A N/A N/A N/A
PCIEX16_3 D1480 A, B Third-party graphics hardware A
PCIEX16_4 MURAIPXI-E4JHF A, B MURAIPXI-E4JHF A
Slot Connectivity Configuration 1 Configuration 2
PCIEX16_1 x16 x 8 B* B*
PCIEX16_2 x8 / x0 A A
PCIEX4_1 x4 N/A N/A
PCIEX16_3 x16 / x8 A B*
PCIEX16_4 x8 / x0 A A